| 1Faustel Mark V Coaters/Laminators | ||
| thelamco |
1Thelma | 1Thundar |
| 1Coating and Laminating Method | 1Direct gravure | 1Direct gravure |
| 1Maximum web width | 156 inches | 160 inches |
| 1Maximum line speed | 11000 fpm | 11000 fpm |
| 1Primary unwind diameter | 160 inches | 160 inches |
| 1Rewind diameter | 160 inches | 178 inches |
| 1Seconday unwind diameter | 160 inches | 184 inches |
| 1Combining nip temperature | 1Up to 210 degrees F | 1Up to 210 degrees F |
| 1Chill section | 14 roll | 14 roll |
| 1Drying Capabilities |
||
| 124 foot oven - single stage | 1Yes | 1No |
| 1In-line floating oven | 1No | 1Yes |
| 1Temperature | 1400 degrees F | 1400 degrees F |
| 1Air velocity | 16000 fpm | 16000 fpm |
| 1Air volume | 18800 cubic fpm | 18800 cubic fpm |
| 1Application Capabilities | ||
| 1Polishing bar capabilities | 1Yes | 1Yes |
| 1Solvent and water based capability | 1Yes | 1Yes |
| 1In-line slitting/trimming | 1Yes | 1Yes |
| 1Wide variety of application cylinders in stock | 1Yes | 1Yes |
| 1Dusenbery 72" Slitter/Rewinder |
||
| 1Score, shear and razor slitting capability | 14 inches wide to 50 inches in diameter | |
| 1Minimum/maximum material weights | 11-ply tissue to 100 mil polystyrenes | |
| 1Maximum web width |
172 inches | |
| 1Maximum winding speed |
12000 fpm |
|
| 1Maximum unwind diameter |
160 inches | |
| 1Maximum rewind diameter | 150 inches | |
| 1Core sizes available |
13", 4", 5", 6", 12" |
|
| 1Facilities/Equipment | ||
| 160,000 sq ft office, manufacturing, warehouse, distribution facility 1Testing laboratory 1Production area heated via radiant heat |
||
| 12 Faustel Mark V coater/laminators (w/built in thermal oxidizer incinerators) 11 Dusenbery 72" custom built slitter/rewinder |
||
| 13 clamp trucks/2 lift trucks 1Scrap compactor and bailer 1Solvent distiller for clean-up waste recovery 14 loading docks (all sealed) |
||
